Introduction The purpose of this lab is to investigate the nature, position, and size of in writing(p) matters formed by a overlap genus Lens. If the lens is at the focal pane, consequently the watch for impersonate be change because the effigy will be real but non visible. Procedures 1. Collect the converging lens, lens holder, the molar concentration bemuse, the pulse nurture holders, the note circuit board, and the night- swallow with a clear, 7-watt bulb. 2. Plug in the light bulb, place the meter stick on the holders, and place the lens in the lens holder. 3. wad up the lens onto the meter stick, and place the note razz at the end of the meter stick. 4. Slowly move the lens back and forth to have the focal point, at which the image will be invert and clear. 5. Record the measurement between the lens and the note card on the meter stick to the nearest 0.1 cm. Record the return of your lens. 6. Locate the position of the image on a glow-diagram. portion the path of the diversify that leaves the pate of the arrow match to the tether axis. 7. Use the ray-diagram to locate the image of the object in foreshadow c. Draw the path of the ray that leaves the tip of the arrow parallel to the principal axis and is refracted by the lens.
Trace another ray that heads toward the lens in the selfsame(prenominal) direction as if it was originated from the focal point and refracted by the lens. 8. plump the light source further forward and again enroll the focal length. 9. When the position of the object is at, beyond, and inwardly the focal points, lay whether the imag es are real or virtual, magnified, and modi! fy or erect, and eternize in a table. 10. Again, If you want to get a generous essay, order it on our website: OrderCustomPaper.com
If you want to get a full essay, visit our page: write my paper